.safetyRow { clear: both; } .safetyLeft { width: 210px; float: left; }Synonym: Nota 1 A Properties: Related Categories Additional Standards, Analytical Standards, Analytical/Chromatography, ICP-OES/-MS, Multielement, Spectroscopy More... packaging   100 ml in Plastic bottle (1095000100) bp   100 °C (1013 hPa) density   1.027 g/cm3 (20 °C) pH   1 (H₂O, 20 °C) storage temp.   Store at +15°C to +25°C. specifications   Be (beryllium): 5 mg/l   Cd (cadmium): 5 mg/l   Ag (Silver): 10 mg/l   Cr (chromium): 20 mg/l   Fe (iron): 20 mg/l   Mn (Manganese): 20 mg/l   Ba (barium): 50 mg/l   Co (cobalt): 50 mg/l   Cu (Copper): 50 mg/l   Ni (Nickel): 50 mg/l   Al (Aluminium): 100 mg/l   As (arsenic): 100 mg/l   Pb (lead): 100 mg/l   Sb (Antimony): 100 mg/l   Se (Selenium): 100 mg/l   Tl (Thallium): 100 mg/l Safety: HS Code  3822 00 00 Hazard Statement(s)  H290: May be corrosive to metals.H314: Causes severe skin burns and eye damage.H317: May cause an allergic skin reaction.EUH071: Corrosive to the respiratory tract. Precautionary Statement(s)  P280: Wear protective gloves/ protective clothing/ eye protection/ face protection.P301 + P330 + P331: IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.P302 + P352: IF ON SKIN: Wash with plenty of soap and water.P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P308 + P310: IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician. Storage class  8B Non-combustible, corrosive hazardous materials WGK  WGK 1 slightly water endangering Disposal  12Inorganic acids and anhydrides thereof should first be diluted or hydrolyzed by stirring carefully into ice water and then neutralized (protective gloves, fume cupboard!) with sodium hydroxide solution (Cat. No. 105587). Before filling into container D, check the pH with pH universal indicator strips (Cat. No. 109535). Fuming sulfuric acid should be carefully stirred dropwise into 40 % sulfuric acid (Cat. No. 109286). Ensure that plenty of ice is available for cooling! When sufficiently cool, treat the highly concentrated sulfuric acid as described above. Analogous to this procedure, other anhydrides can be converted into their corresponding acids. Acid gases (e.g. hydrogen halide, chlorine, phosgene, sulfur dioxide) can be introduced into dilute sodium hydroxide solution and after neutralization disposed of in container D. Hazard Pictogram(s)    GHS05 Hazard Pictogram(s)    GHS07 Hazard Symbols    Corrosive Declaration (railroad and road) ADR, RID  UN 2031 , 8, II Declaration (transport by air) IATA-DGR  UN 2031 , 8, II Declaration (transport by sea) IMDG-Code  UN 2031 , 8, II, Segregation Group: 1 (Acids) Categories of danger  corrosive, sensitizing R Phrase  R 34-43Causes burns.May cause sensitisation by skin contact. S Phrase  S 26-36/37/39-45In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.Wear suitable protective clothing, gloves and eye/face protection.In case of accident or if you feel unwell, seek medical advice immediately (show the label where possible).