tech_banner
Bruker Introduces New Products for Preclinical Imaging at WMIC 2014
HomeTissue-TearorTissue-Tearor一般程序:使用安全刀片或剪刀将组织切成小块(长度约 1 毫米)。如果您的样品已经预冻并且太大而无法轻松吸入探头尖端,您可能需要冷冻粉碎样品(请参阅 https://www.biospec.com/products/biopulverizer?taxon_id=28)。将组织放入含有 3 至 10 体积均质介质的均质容器中。将探针底部降低 1 英寸,放入组织悬浮液中,打开组织撕裂器,并使用上下轻拍动作操作 5 秒至 2 分钟。请勿将探头浸入均质溶液中超过二分之一。使用较低的速度进行亚细胞颗粒制备,并使用最大电机速度进行生化或大分子提取。虽然组织撕裂器在均质过程中不会加热样品,但如果需要,可以在均质过程中将均质容器置于冰浴中。组织撕裂者可以使用三夹和环形支架进行支架安装。在处理大量样品时,这是一种方便的配置。为避免飞溅,请在从均质容器中取出之前关闭组织撕裂器。不使用时,将 TT 放置在提供的塑料支架上,以便液体排出。请勿将其侧放。清洁:

清洁组织撕裂器非常重要。许多生物材料和提取介质具有惊人的腐蚀性,即使探头是不锈钢的。如果生物材料进入探头上部并进入电机轴承,电机轴承将被损坏。在重复采样之间,可以通过在装有水或清洁剂的容器中短暂操作 TT 来对装置进行表面清洁。一天结束时,拧下不锈钢定子(外部),然后直接拉下仍然连接到电机上的内转子。 [注意,切勿在定子拆下的情况下打开组织撕裂机 - 它会弯曲d 转子]。用清洁剂清洗转子和定子,冲洗并干燥零件,然后将探头重新组装到电机上。如有必要,可以将整个探头(定子和转子)反复从电机单元上拆下并进行高压灭菌。

维护:

转子轴上的惰性氟碳套筒轴承需要随时更换到时间了。这种需求通常通过观察到电机振动增加以及运行期间发出嘈杂的嗡嗡声来表明。组织撕裂器附带了备用氟碳轴承以及用于从电机卡盘上拆下转子的专用扳手。

如果更换氟碳轴承并且设备仍然有噪音,那么您可能会弯曲转子或电枢和轴承组件生锈。请致电我们获取更多信息和备件编号。

HomeBeadBeater迷你搅拌室迷你搅拌室

迷你搅拌机

目录号。编号 293350 - 封闭式迷你搅拌室。工作容量,100-350 mlCat。编号 293030 - 封闭式迷你搅拌室。工作容量,10-30 mlCat。编号 293080 - 封闭式迷你搅拌室。工作容量,20-80 毫升

该产品不提供所选货币。有货BackorderedOut of Stock描述

带有不锈钢切割刀片的搅拌室,用于混合较小的样品体积。室由电机底座供电Hamilton-Beach 刀片式搅拌机或 BeadBeater 珠磨机。

腔室可以高压灭菌。

哎呀!

抱歉,某些产品似乎没有指定数量。

确定

已添加到 cart 成功!\'Mini-Blender结帐查看购物车您可能还感兴趣...

首页购物车您的购物车

您的购物车是空的。

继续购物翻译错误:Unexpected character encountered while parsing value: <. Path \'\', line 0, position 0.主页零件和配件迷你搅拌机室迷你搅拌机室

迷你搅拌机

目录号。编号 293350 - 封闭式迷你搅拌室。工作容量,100-350 mlCat。编号 293030 - 封闭式迷你搅拌室。工作容量,10-30 mlCat。编号 293080 - 封闭式迷你搅拌室。工作容量,20-80 毫升

该产品不提供所选货币。有库存BackorderedOut of Stock描述

带有不锈钢切割刀片的搅拌室,用于混合较小的样品体积。室由电机底座供电Hamilton-Beach 刀片式搅拌机或 BeadBeater 珠磨机。

腔室可以高压灭菌。

哎呀!

抱歉,某些产品似乎没有指定数量。

确定

已成功添加到购物车!\'Mini-Blender结账查看购物车您可能还感兴趣...

Bruker Introduces New Products for Preclinical Imaging at WMIC 2014

Bruker also announces First MPI Customer Installation, new PCI Center in Singapore
 

SEOUL, Korea – September 17, 2014 – At the 2014 World Molecular Imaging Congress (WMIC, www.wmis.org), Bruker today introduces new products for improved performance and customer experience in preclinical imaging, and announces related achievements:
 

\"\"

 

NEW PRODUCT:

SkyScan™ 1278, the worlds fastest, low-dose, high-resolution micro-CT: With the launch of the next-generation SkyScan 1278 micro-CT system for in vivo X-ray computed tomography, Bruker is addressing the latest needs of preclinical imaging scientists striving to reduce the radiation dose used in animal studies, while maintaining highest image quality. As part of the development, Bruker has created a new micro-CT spatial beam shaper, which reduces the absorbed dose by up to five times, while maintaining high quality image output.

The SkyScan 1278 has a highly sensitive flat-panel detector that is able to deliver images of mouse heart and lung activities even without a contrast agent. Such images allow the user to explore cardiac and respiratory function, while reducing animal stress and the cost of the study. A full-body animal scan can take 8 seconds or less, reducing run times and increasing the speed of data collection.
 

\"\"

FIRST CUSTOMER INSTALLATION:

Bruker announces the first customer installation of its MPI PreClinical, a preclinical Magnetic Particle Imaging (MPI) scanner, at the University Medical Center Hamburg-Eppendorf (UKE), Germany. Significantly, this marks the first time that MPI technology has been delivered in a commercial system. Preclinical MPI is an entirely new technology for in vivo imaging of small animals used in translational research.

The new MPI PreClinical was announced in 2013 and is the result of Brukers collaboration with Royal Philips (NYSE: PHG, AEX: PHIA). It combines Brukers leadership in preclinical imaging with Philips strength in medical imaging. MPI was invented by scientists at Philips and uses the detection of magnetic iron-oxide nanoparticles injected into the bloodstream to produce three-dimensional images at millisecond intervals, providing the potential for real-time 3D imaging in vivo. MPIs high time-resolution allows researchers to investigate a range of dynamic issues, e.g. in cardiovascular research, which cannot be studied using other techniques.
 

\"\"

NEW PRODUCT: BioSpec 21T Ultra-high Field MRI with CryoProbe

Bruker introduces the BioSpec® 210/11, a new 21 Tesla ultra-high field MRI with CryoProbe™ for small animal Magnetic Resonance Imaging (MRI). As in vivo investigation shifts from organ and tissue imaging to cellular and molecular research, a significant boost in sensitivity and resolution is required. With the unique 21T MRI, Bruker customers can set new performance benchmarks and gain new insights in preclinical research.
The BioSpec 210/11 is based on Brukers proven 21 Tesla 11 cm USR™ magnet that is already successfully used in FT-mass spectrometry. UltraShield™ magnet technology reduces magnetic stray fields, while Brukers active refrigeration technology virtually eliminates cryogen refills, reducing down-time and user maintenance efforts.
 

\"\"

NEW PCI CENTER:

Bruker has enjoyed a long-term partnership with the Singapore Bioimaging Consortium (SBIC), and the new SBIC-Bruker Preclinical Imaging (PCI) Center in Singapore consolidates bio-imaging capabilities to promote innovation in biological research. The PCI facility, due to open in October 2014, will provide advanced demonstration, training and applications support for Brukers industry-leading preclinical portfolio and multi-modal imaging platforms. By combining PCI technologies and modalities, the center will play a key role in promoting the application of complementary imaging information.


Dr. Wulf I. Jung, President of Brukers Preclinical Imaging division, stated: \"At WMIC 2014, we continue our Innovation with Integrity to enable the success of our customers. With differentiated, high performance products we enable novel preclinical imaging research and gain access to new markets, while maintaining our excellent reputation in the scientific research community.\"
 

About Bruker Corporation
Bruker (NASDAQ: BRKR) is a leading provider of high-performance scientific instruments and solutions for molecular and materials research, as well as for in vitro diagnostics, industrial and applied analysis.