Highlights
- Simple 20 Second Transformation: No heat shock! Just add DNA and spread on plate.
- High Transformation Efficiencies: Achieve 108 - 109 per µg of plasmid DNA.
- Versatile: Excellent for general cloning, blue-white screening, and plasmid isolation.
Description
Additional Info | Insert stability due to recA1 mutation. Can be used for blue/white screening, accepts large plasmids due to deoR mutation. High plasmid yield due to endA1 mutation. |
---|---|
Genotype | F-Φ80lacZΔM15 Δ(lacZYA-argF)U169 deoR nupG recA1 endA1 hsdR17(rK- mK+) phoA glnV44 (supE44) thi-1 gyrA96 relA1,λ- |
Processing Time | 20 Seconds |
Product Storage | -70°C to -80°C |
Transformation Efficiency | 108 - 109 transformants per µg of plasmid DNA |
Q1: Are competent cells GMOs?
All our competent cells are classified into Biosafety level 1 and are not genetic modified organisms. Only when transformed with a plasmid they become GMOs.
Q2: Are the Mix & Go! strains dam+ and dcm+?
Most cloning strains will be dam+/dcm+ unless specifically noted in the genotype.
Q3: Do the Mix & Go! strains methylate DNA?
Yes
Q4: Which strains are equivalent to the Zymo strains?
DH5α is equivalent to Zymo 5α. DH10B, Top10, and One Shot Top10 are equivalent to Zymo 10B.For XL-21 Blue, JM109 is the closest match and for Stbl3, HB101 is the closest match.
Q5: How to reduce satellite colonies on agar plates?
– Prepare fresh agar plates– Use more antibiotics in plates– Incubate plates for a shorter time after plating cells
Q6: Is it possible to dilute the competent cells?
We do not recommend diluting the competent cells. We recommend using less DNA to transform cells, or aliquot cells in smaller volumes before transformation. If absolutely necessary, cold 1X Competent Buffer (Mix & Go Transformation Kit, T3001 & T3002) should be used in the dilution.
Q7: Which antibiotics can be used with the Mix & Go! procedure?
No outgrowth is necessary when using Ampicillin or Carbenicillin for selection. However, an outgrowth step is required when using Chloramphenicol, Kanamycin, and Tetracycline because of the mode of action of the antibiotic itself. We recommend the following procedure for the outgrowth step:1. Incubate cells on ice for 5-10 min after addition of plasmid. 2. Add 4 volumes of SOC media.3. Incubate at 37°C for 60 min with gentle shaking at 200-300 rpm.4. Spread on a pre-warmed culture plate containing the appropriate antibiotic.
Q8: Which Plasmid Size can be used for transformation?
For Zymo 5α and Zymo 10B up to 20kb. However, transformation efficiency decreases proportionally from 10-20kb. Above 20kb, cells are difficult to transform. JM109, HB101, XJa, XJa (DE3), XJb, XJb (DE3) and TG1 can handle constructs up to 10kb.
Q9: Which is the recommended DNA concentration and volume for transformation?
There really is no maximum or minimum recommended DNA concentration, but we use 10 pg for quality control. However, the volume of DNA added should not exceed 5% of the cells total volume; the efficiency can decrease several fold as the volume of DNA used increases. If the DNA sample is too diluted, use our DNA Clean & Concentrator.
Q10: What are some tips to improve transformation efficiency?
1. Thaw cells on ice, not room temperature.2. Incubate cells and DNA mixture on ice, not at room temperature. However, do not incubate longer then 1 hour.3. Ensure cells are still frozen when received.4. Pre-warm the culture plates at 37°C for at least 30 minutes.5. Prepare fresh LB agar plates containing the appropriate antibiotic. 6. Prepare a new DNA sample.7. Store the cells at -80°C (not 4°C or -20°C). If the freezer breaks, the cells should be OK as long as the temp does not go higher than -50°C.8. Avoid freeze/thaw cycles.
Q11: How will a heat-shock affect my Transformation Efficiency?
Heat shock is not necessary, however sometimes it can be beneficiary when preparing libraries or transforming XJb Autolysis E. coli strains.We recommend the following protocol for Heat Shock with Outgrowth: 1. Incubate cells on ice for 5-10 min after addition of plasmid.2. Incubate cells at 42°C for 45 seconds.3. Add 450 ml of SOC to the cells. 4. Incubate at 37°C for 60 min with gentle shaking at 200-300 rpm.5. Spread on a pre-warmed culture plate containing the appropriate antibiotic.
“It saves time and money and it really works! I chose this kit because it was regularly used by the people at Addgene.com. It is really easy to make and the transfection efficiency is higher than what I would get from the homemade competent cells. The feature that I like the most about this kit is that it takes less than 5 min to perform the whole transformation procedure (with ampicillin as a selection marker) instead of a regular 1.30 H!”
-Cho R. (Michigan State University)
“Worth the price. Great transformation efficiency, save so much time from the traditional transformation protocol, awesome price and last forever. Thanks!”
-Yu L. (Caltech)
“The fastest competent cells. Revolutionary! No need to care for the delicate transfection of your E.coli, Mix&Go has shortened the process from 2h to 5min. Simply add a few microliters of your plasmid on ice, wait 5min, Voila!"
-Jerome B (UCSF)
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
最近要添加一些设备,请教各位大神推荐的厂家及其型号。
需要的设备如下:高速剪切混合机、湿法制粒机、干法制粒机、整粒机、包衣机、胶囊填充机、铝塑包装机。
先谢谢各位大神了
(y)战友资源。萝卜茄子都是好美味。
常用制药设备1.rar(232.25k)
要是能上传一些真实药厂设备,也许对大家都有帮助。
下面上传《常用制剂设备》的图扫描。
http://www.k65.net/mail/url.php?n=eXpmMzcyMT0v
code:37217613
先说出自己这几天学习注射剂的心得:
关于注射剂仿制,先对照原研处方,处方设计尽量和原研一致,通过考察评价外观、色泽、澄明度、pH、含量、有关物质、细菌内毒素或热原、不溶性微粒和稳定性等,确定一个符合标准的相关标准高于原研药的处方。也就是说注射剂仿制就是通过处方和工艺的筛选找出一个满足标准(pH、含量、有关物质、细菌内毒素或热原等)的处方和工艺,这个是不是仿制的基本思路?
而这其中有还很多问题。只有思路还不进行实际研发。
比如处方设计中,一般常用辅料有哪些?
一般在什么情况下需要加入什么特殊的辅料?比如pH调节剂,抑菌剂等。
做研发的实验步骤是如何。有了一个初步的处方,我们第一步是配溶液?还有灭菌、封口这个步骤是怎样的?每一步都用什么设备,有几种工艺可以选,还一般的操作条件如温度速度时间等。
很多细节问题和思路问题,做注射剂的高手和新手们都来说说哦。这是一个开放的交流大家可以说的更远,说出自己的精华。
另外版主给加个积分呗,很多帖子我看不了!!!
下面是我觉得做注射剂必须了解的基本法规链接,给新手看滴,希望有帮助
http://www.sfda.gov.cn/WS01/CL0058/9348.html
关于印发《可见异物检查法补充规定》的通知
http://www.sfda.gov.cn/WS01/CL0055/27800.html
关于发布化学药品注射剂和多组分生化药注射剂基本技术要求的通知
http://www.sfda.gov.cn/WS01/CL0055/24969_9.html
关于开展注射剂类药品生产工艺和处方核查工作的通知
常用制药设备的PPT(带彩图).rar(751.71k)
比较电泳设备.pdf(425.0k)
暂无品牌问答