Lever Tissue Press
The Lever Tissue Press is a top-of-the-line stainless steel garlic press improved in performance by the addition of a silicone-rubber gasket on the lever press piston.The press efficiently macerates or mechanically disaggregates 5 to 50 grams of fresh, soft plant or animal tissue. By 'soft' we mean nonfibrous tissue. Acceptible examples are muscle, brain, liver, plant fruits, some plant roots and tubers. An extra "can" is included to facilitate processing of multiple samples.
Our Price : $0.00
The Lever Tissue Press prepares tissue as an initial mincing step preceeding mechanical homogenization (cell disruption) or preceeding single cells isolation from solid tissue by digestion of extracellular connective matrix with proteolytic enzyme. The press eliminates tedious chopping of tissue into little pieces with a scissors or scalpel and produces much smaller tissue pieces. Unlike many other tissue dispersion/blending devices, no buffer is added in its operation.
Special App! Disaggregation of tissue for primary culture. - Incubation time needed for enzymatic tissue disaggregation is reduced and during the incubation period with the digestive enzymes, diffusion of nutrients and gases into the tissue mass are optimized. Expect higher yields of viable cells. For an excellent review of the Method of Enzymatic Disaggregation see http://www.worthington-biochem.com/tissuedissociation/default.html) .
Tissue processed in this press must be "soft", relatively non-fibrous and have high water content. Acceptible examples are muscle, brain, liver, plant fruits, and some plant roots and tubers. If the tissue is fatty or partially fibrous, manually trim off the tough or fatty parts before pressing. Fibrous tissue will interfere with the passage of the soft tissue through the press and lower the yield of dispersed cell material. Unacceptible tissues are skin, hide, connective tissue, woody or fibrous plant stems, many mature seeds and all dried tissues.
Operating Instructions:
1) Retract the piston of the Lever Tissue Press from its stainless steel "can". Add 1 to 10 g of fresh tissue into the cavity of the "can" and insert the piston back into position.
2) Gripping the two levers, force the piston down the can. Scrape the dispersed tissue protruding from the bottom of the can with a knife or scapel. Depending on the amount of connective or fibrous tissue present in the sample, the yield of dispersed tissue will vary from 20-95%.
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
我做的是用锁式探针来检测dna模板的ram,探针80base,其中杂交区40base,引物分别为16、18base,连接酶选取的T4 ligase和Taq DNA ligase两种,分别对应恒温和变温情况下的扩增。水解体系为EXO I和Exo Ⅲ的混合体系,参考的外文文献,应该没什么问题。聚合酶用的是Bst DNA大片段聚合酶。
一开始选择的探针浓度为200pmol/L,扩增效果挺好,当时用的DNA模板是质粒阳性标准品,但是后来在做敏感性的时候发现条带梯度差异几乎没有,而且阴性也出带,后来就没法做敏感性和特异性验证了,实验停滞了2个月一直也没进展。
按理说RAM借助锁式探针扩增的独特方式以及水解体系的存在可以有效防止污染才对,希望大家给点建议该如何解决。
万分感谢!!!!!!!!!!
附一张以前做敏感性的图(marker为2000的DNA ladder)以做参考
这里所说的一个碱基的差异该怎么检测?如何理解?
原理?(没有就算了...)
答的好的提高悬赏50分
有原理的追加50分
谢谢啊~~~~
同一温度下,首先通过M-MLV反转录酶产生靶标核酸(RNA)的一个双链DNA拷贝,然后利用T7RNA多聚酶从该DNA拷贝上产生多个(100~1000个)RNA拷贝;每一个RNA拷贝再从反转录开始进入下一个扩增循环;还可以加入荧光探针(分子信标),带有荧光标记的探针和这些RNA拷贝特异结合,产生荧光。该荧光信号可由实时荧光PCR仪实时捕获,直观反映扩增循环情况。
SAT检测技术的优势
→先进的恒温扩增技术
核酸扩增在一个温度下进行(42℃),无需热循环。
→领先的RNA检测技术
SAT技术直接以病原体特异性RNA为扩增靶标,以扩增产物RNA为检测靶标,在实际应用中更显优势意义。
→更高的检测灵敏度和准确性
SAT技术的扩增效率极高,15~30分钟即可将模板扩增109倍,检测灵敏度和准确性远高于其他核酸检测技术。扩增时间短,效率高。
→有效减少假阴性结果
SAT技术采用M-MLV逆转录酶和T7RNA多聚酶进行核酸扩增,相对于其它核酸扩增技术,反应抑制物更少,有效减少假阴性结果。
→有效的解决了扩增产物的污染问题
由于扩增产物为RNA,环境中极易降解,从而大幅度提高检测结果的可靠性。
→大大降低了核酸扩增实验室的要求
暂无品牌问答