Description
During the past five decades, various types of chemistries have been used for conjugation of molecules such as antibodies, peptides, proteins or other reactive ligands to the surface of liposomes. In general, the conjugation can be achieved through the N-terminus, the C-terminus or the available sulfur (e.g. Fab’ fraction or thiolated antibodies). Not all chemistries have the same yield and efficiency of conjugation and often reproducing biocompatible batches can be a challenge. Coupling of sulfhydryl groups with maleimide groups has been the most widely used conjugation of antibodies to liposomes. Different lipids which are offered for thioether conjugation contain maleimide, aromatic maleimides such as N-[4-(p-maleimidophenyl)-butyryl] (MPB) or 4-(N-maleimidomethyl)cyclohexane-1-carboxylate (MCC) group. The maleimide function group of MCC which contains an aliphatic cyclohexane ring is more stable toward hydrolysis in aqueous reaction environments rather than the aromatic phenyl group of MPB. MPB and MCC lipids are non-PEGylated lipids and they have separate kits and protocols than PEGylated maleimide lipids.
One of the major problems of using maleimide chemistry for conjugation is the rapid hydrolysis of maleimide lipid. The rate of hydrolysis is much faster in alkaline pH and therefore, controlling the pH throughout the entire process is necessary and it is recommended to use the pH of 7. Due to the hydrolysis of maleimide group, our kits are designed for post-insertion of ligand conjugated maleimide lipid into the preformed liposomes. After post conjugation, the liposomes must be used right away because hydrolysis may occur after sulfhydryl coupling to the maleimide as well. Another problem is the reactivity and oxygen sensitivity of sulfhydryl group on thiolated antibody or Fab’ fragment. Due to that the conjugation reaction should be done under argon or nitrogen using inflatable polyethylene glove bag chambers.
Thiolation, which is adapted to the modification of all the antibody functional groups, is relatively clean, fast, and efficient. However, different antibodies may be more sensitive to some procedures than others. Therefore, it is recommended to select the chemistry and site of modification depending on what procedures are compatible with the antibody.
Immunosome®-Maleimide is a PEGylated product. For the other sulfhydryl reactive (PEGylated and non-PEGyalated products) and also Immunosome® products suitable for other types conjugation methods see here.
Formulation Information
Immunosome®-Maleimide (PEGylated) (Post-insertion)
Post-insertion Kit (3 Vials) | Specification |
---|---|
Vial 1 | Preformed liposomes composed of HSPC and Cholesterol (60:40 molar ratio) |
Vial 2 | DSPE-PEG(2000)-Maleimide lipid (reactive PEGylated lipid) in powder form |
Vial 3 | DSPE-PEG(2000) lipid (non-reactive PEGylated lipid) in powder form |
Lipid Composition for Vial 1* | Concentration (mg/ml) | Concentration (mM) | Molar Ratio Percentage |
---|---|---|---|
Hydrogenated Soy PC | 11.5 | 14.66 | 60 |
Cholesterol | 3.83 | 9.9 | 40 |
Total | 15.33 mg/ml | 24.56 mM | 100 |
* For the 5-ml kit, the volume of vial 1 is 4 ml. 1 ml of micelle solution that are formed using vials 2 and 3 will be added to this vial to make the final volume of 5 ml in the final product. For the 2-ml kit, the volume of vial 1 is 1.6 ml. 0.4 ml of micelle solution that is formed using vials 2 and 3 will be added to this vial to make the final volume of 2 ml in the final product. |
Buffer and Liposome Size for Vial 1 | Specification |
---|---|
Buffer | Phosphate Buffered Saline |
pH | 7.4 |
Liposome Size | 100 nm |
Vial 2 * | Specification |
---|---|
DSPE-PEG(2000)-Maleimide Lipid | This vial contains reactive DSPE-PEG(2000)-Maleimide lipid in powder form. This lipid is conjugated to a reactive protein, peptide or ligand containing sulfhydryl and then mixed with non-reactive DSPE-PEG(2000) lipid in aqueous solution to form micelles. The PEGylated lipid micelles are incubated with preformed liposomes in vial 1 and PEG lipids will post-insert themselves into the liposomes. |
* The amount of the powdered PEG(2000)-Maleimide lipid for 2-ml kit is 1.34 mg and for 5-ml kit is 3.34 mg. |
Vial 3 * | Specification |
---|---|
DSPE-PEG(2000) Lipid | This vial contains non-reactive DSPE-PEG(2000) lipid in powder form. This lipid in mixed with DSPE-PEG(2000)-NHS lipid which is already conjugated to a ligand (protein, peptide, etc.) in aqueous solution to form micelles. The PEGylated lipid micelles are incubated with preformed liposomes in vial 1 and PEG lipids will post-insert themselves into the liposomes. |
* The amount of the powdered PEG(2000)-DSPE lipid for the 2-ml kit is 5 mg and for the 5-ml kit is 12.5 mg. |
Conjugation Protocol (Post-insertion)
Materials and Equipment
The 3-vial post-insertion kit contains preformed liposomes (vial 1), DSPE-PEG(2000)-Maleimide lipid in powder form (vial 2) and non-reactive PEGylated lipid in powder form (vial 3). In order to use the post-insertion kit, you will need:
- Two small 10-ml round bottom flasks or two small glass vials.
- A rotary evaporator. We understand that many labs might not have a rotovap. Alternatively, you can use a nitrogen tank connected to a thin hose for creating a stream of nitrogen flow to dry the lipid and make a thin film.
- A small amount of a solvent such a chloroform or methylene chloride (you will only need a few milliliters).
- Phosphate buffered saline (PBS). pH should be adjusted to 7.
- 2-mercaptoethanol.
- Aldrich®-Atmosbag connected to a nitrogen tank. Due to oxygen sensitivity of the reaction, the coupling reacting should be done in oxygen-free environment.
- Float-A-Lyzer® with a proper MWCO that easily allows the cleanup of your liposome conjugated ligand from free and non-conjugated protein/peptide/ligand. You need to make sure that the MWCO is below 1,000,000 dalton. At 1,000,000 dalton, the pore size on the dialysis membrane gets close to 100 nm and therefore your liposomes can be dialyzed out. You cannot use dialysis cassettes blindly. Please understand the technique before using either spin columns or dialysis cassettes. If you do not use the correct MWCO, you can lose your entire prep. For this protocol, we recommend MWCO of 300,000 dalton.
- A Sonicator. It is better to have a bath sonicator. If you do not, that is fine, and you still can follow the protocol. You may also use a vortex instead of the sonicator for agitation of the solution as well.
Preparation Method
- The post-insertion kits come in two sizes; 2 ml and 5 ml. For the 2-ml kit size, dissolve the content of vial 3 (non-reactive PEGylated lipid) in 100 µl of chloroform or methylene chloride. For the 5-ml kit size, the content of vial 3 should be dissolved in 250 µl of chloroform or methylene chloride. Transfer the solution to a 10-ml round bottom flask. Dry the chloroform using a rotary evaporator or under a stream of nitrogen in order to make a dried lipid film.
- For the 2-ml kit, add 100 µl of PBS buffer to the dried lipid film. For the 5-ml kit, the amount of the added buffer is 250 µl. It is preferred to sonicate the hydrated lipid film using a bath sonicator and sonicate the micelle solution for 5 minutes. If you do not have a bath sonicator then hydrate the dried lipid film with PBS for at least 1 hour and constantly rotate the solution in the round bottom flask using a rotavap (not connected to vacuum) or by hand to make sure that all the dried lipid on the wall of the round bottom flask will go to the solution and form micelles. Alternatively, you can use a vortex to agitate the solution. The goal is to have all the dried lipid on the wall of the round bottom glass to go to the micelle solution. Cover the mouth of the round bottom flask with parafilm. Refrigerate the micelle solution of non-reactive PEG lipids until it is ready to be mixed with micelles formed in the step 5.
- The 2-ml kit contains 1.30 mg (0.22 µmol) of reactive DSPE-PEG(2000)-Maleimide lipid (vial 2). The 5-ml kit contains 3.25 mg (0.55 µmol) of reactive DSPE-PEG(2000)-Maleimide lipid (vial 2). For the 5-ml kit size, the content of vial 2 (DSPE-PEG(2000)-Maleimide lipid) should be dissolved in 250 µl of chloroform or methylene chloride. Transfer the solution to a 10 ml round bottom flask. Dry the chloroform using a rotary evaporator or under a stream of nitrogen to make a dried lipid film.
- Dried DSPE-PEG-Maleimide film is hydrated with PBS buffer to form a micellar lipid solution. If you are using the 2-ml post-insertion kit, then hydrate the 1.30 mg of dried DSPE-PEG-Maleimide lipid film in 100 µl of buffer, and if you are using the 5-ml post-insertion kit, then hydrate the 3.25 mg of dried DSPE-PEG-Maleimide lipid film in 250 ml of buffer.
- Incubate the micellar lipid solution with the antibody, protein or peptide at 3:1 molar ratio or lipid to protein. Allow the reaction to proceed in phosphate buffer under the nitrogen (inert gas) chamber for 8 hours at room temperature with moderate stirring. The concentration of antibody, peptide or protein that is added to micellar solution is depend on the solubility of your molecule. It is recommended to use a fairly concentrated solution. For example, use a volume around 100 µl of antibody, peptide or protein for 2-ml kit and around 250 µl of antibody, peptide or protein for 5-ml kit.
- The excess maleimide groups were capped by reaction with 2-mercaptoethanol. The reaction is quenched with 2 mM 2-mercaptoethanol for 30 min.
- The micelles obtained from the steps 2 and 5 are mixed. Total volume of the 2 mixed micelles for the 2-ml kit is 300 µl and for the 5-ml kit is 750 µl. Incubate the mixed micelles with preformed liposomes (vial 1) at 60℃ for 30 min.
- Remove non-conjugated antibody, protein, peptide or ligand by dialysis. We prefer dialysis to size exclusion columns. Dialysis is a much slower process but there will be minimum loss of immunoliposomes after the prep is cleaned from non-conjugated protein/peptide/ligand. Spin columns are much faster, but you can easily lose over 50% of the liposomes on the spin column. We recommend using Float-A-Lyzer® dialysis cassette from Spectrum Labs. You need to choose a cassette with proper MWCO depending on the MW of your protein, ligand, antibody or antibody fragment. In this case, we recommend using a dialysis cassette with MWCO of 300,000 dalton. NOTE: If you decide to use a dialysis cassette, you need to make sure that the MWCO is below 1,000,000 dalton. At 1,000,000 dalton, the pore size on the dialysis membrane gets close to 100 nm and therefore your liposomes can be dialyzed out. You cannot use dialysis cassettes and spin columns blindly. They come in various sizes, and you need to choose the correct size wisely. Dialyze the immunoliposome solution in 1 liter of PBS at pH 7 for 8 hours. Change the dialysis buffer with a fresh 1 liter of PBS and let is dialyze for another 8 hours. After this step, your cleaned up immunoliposome is ready to be used.
Quantification of reactive sulfhydryl in antibodies or ligands (Ellman’s Assay)
The yield of conjugation is the most important factor in formulating immunoliposomes. Many scientists simply assume that their thiolated antibody or the Fab’ fraction contains reactive sulfhydryl for conjugation to maleimide lipid without further assaying. Disulfide bridge can form very easily so it is very important to quantify the available reactive sulfhydryl in your antibody or ligand solution before performing the conjugation reaction with maleimide liposomes.
Ellman’s assay is a widely used assay for determining the amount of free sulfhydryl. You can follow the step by step protocol here.
Liposome Particle Calculator
Immunosomes are unilamellar liposomes and sized to 100 nm. The molar concentration of liposome is 24.56 mM. By having liposome diameter (nm) and lipid concentration (µM), you can calculate the total number of the lipids in one liposome and the number of the liposomes in one milliliter of the liposome solution. To use the calculator click here.
Technical Notes
- After conjugation reactions, liposomes containing excess maleimide or thiol groups may exhibit undesirable qualities, such as aggregation, reactions in vitro and in vivo, and immunogenicity. These reactive moieties can be quenched with reagents containing iodo-, maleimide, or sulfhydryl groups where appropriate. This is likely to be a particularly serious problem for thiolated liposomes. Therefore, it is recommended that the antibody be thiolated to generate the appropriate reactive entities for the final conjugation reaction.
- In order to prevent oxidation of sulfhydryl on antibody and formation of disulfide bridge, the coupling reaction must be performed under an inert atmosphere such as argon or nitrogen. To set up an inert gas chamber we recommend using Aldrich®-Atmosbag with is a flexible, inflatable polyethylene chamber with built-in gloves which is a portable and inexpensive alternative to laboratory glove box.
- Maleimide group on lipid is highly sensitive of alkaline pH and it will hydrolyze rapidly at higher pH. Experimental investigations have been shown that in alkaline condition (pH > 7.5), maleimide and its derivatives are hydrolyzed to a non-reactive maleamic acid (see the figure below). This instability should be considered in any quantitative procedures, such as coupling with sulfhydryl groups. Therefore, it is very important to make sure that the pH of the reaction with stay between 6.5 and 7 during the entire process.
- Liposomes should be kept at 4°C and NEVER be frozen.
Database
Direct link to the database page for easy navigation: Immunoliposomes Conjugation Database
Appearance
Immunosome®-Maleimide (PEGylated) post-insertion kit comes in three vials: vial 1 is a white translucent liquid made of nano size unilamellar liposomes which does not contain any reactive of non-reactive PEGylated lipid. Usually due to the small size of liposomes no settling will occur in the bottom of the vial. Vial 2 contains reactive DSPE-PEG(2000)-Maleimide lipid in white powder form. Vial 3 contains non-reactive DSPE-PEG(2000) lipid in white powder form.
Ordering/Shipping Information
- All liposome based formulations are shipped on blue ice at 4°C in insulated packages using overnight shipping or international express shipping.
- Liposomes should NEVER be frozen. Ice crystals that form in the lipid membrane can rupture the membrane, change the size of the liposomes and cause the encapsulated drug to leak out. Liposomes in liquid form should always be kept in the refrigerator.
- Clients who order from outside of the United States of America are responsible for their government import taxes and customs paperwork. Encapsula NanoSciences is NOT responsible for importation fees to countries outside of the United States of America.
- We strongly encourage the clients in Japan, Korea, Taiwan and China to order via a distributor. Tough customs clearance regulations in these countries will cause delay in custom clearance of these perishable formulations if ordered directly through us. Distributors can easily clear the packages from customs. To see the list of the distributors click here.
- Clients ordering from universities and research institutes in Australia should keep in mind that the liposome formulations are made from synthetic material and the formulations do not require a “permit to import quarantine material”. Liposomes are NOT biological products.
- If you would like your institute’s FedEx or DHL account to be charged for shipping, then please provide the account number at the time of ordering.
- Encapsula NanoSciences has no control over delays due to inclement weather or customs clearance delays. You will receive a FedEx or DHL tracking number once your order is confirmed. Contact FedEx or DHL in advance and make sure that the paperwork for customs is done on time. All subsequent shipping inquiries should be directed to Federal Express or DHL.
Storage and Shelf Life
Storage
Immunosome® products should always be stored at in the dark at 4°C, except when brought to room temperature for brief periods prior to animal dosing. DO NOT FREEZE. If the suspension is frozen, the encapsulated drug can be released from the liposomes thus limiting its effectiveness. In addition, the size of the liposomes will also change upon freezing and thawing.
Shelf Life
Immunosome®-Maleimide kit is made on daily basis. The batch that is shipped is manufactured on the same day. It is advised to use the products within 4 months of the manufacturing date.
References and background reading
1. Matsui, S., and H. Aida. “Hydrolysis of some N-alkylmaleimides.” Journal of the Chemical Society, Perkin Transactions 2 12 (1978): 1277-1280.
2. Barradas, Remigio Germano, Stephen Fletcher, and John Douglas Porter. “The hydrolysis of maleimide in alkaline solution.” Canadian Journal of Chemistry 54.9 (1976): 1400-1404.
3. Gregory, John D. “The stability of N-ethylmaleimide and its reaction with sulfhydryl groups.” Journal of the American Chemical Society 77.14 (1955): 3922-3923.
4. Nassander UK, Steerenberg PA, De Jong WH, Van Overveld WO, Te Boekhorst CM, Poels LG, Jap PH, Storm G. Design of immunoliposomes directed against human ovarian carcinoma. Biochimica et Biophysica Acta (BBA)-Biomembranes. 1995 Apr 12;1235(1):126-39.
5. Derksen JT, Morselt HW, Scherphof GL. Uptake and processing of immunoglobulin-coated liposomes by subpopulations of rat liver macrophages. Biochimica et Biophysica Acta (BBA)-Molecular Cell Research. 1988 Sep 16;971(2):127-36.
6. Derksen JT, Scherphof GL. An improved method for the covalent coupling of proteins to liposomes. Biochimica et Biophysica Acta (BBA)-Biomembranes. 1985 Mar 28;814(1):151-5.
7. Nässander UK, Steerenberg PA, Poppe H, Storm G, Poels LG, De Jong WH, Crommelin DJ. In vivo targeting of OV-TL 3 immunoliposomes to ascitic ovarian carcinoma cells (OVCAR-3) in athymic nude mice. Cancer research. 1992 Feb 1;52(3):646-53.
8. Park JW, Hong K, Carter P, Asgari H, Guo LY, Keller GA, Wirth C, Shalaby R, Kotts C, Wood WI. Development of anti-p185HER2 immunoliposomes for cancer therapy. Proceedings of the National Academy of Sciences. 1995 Feb 28;92(5):1327-31.
9. Koning GA, Morselt HW, Velinova MJ, Donga J, Gorter A, Allen TM, Zalipsky S, Kamps JA, Scherphof GL. Selective transfer of a lipophilic prodrug of 5-fluorodeoxyuridine from immunoliposomes to colon cancer cells. Biochimica et Biophysica Acta (BBA)-Biomembranes. 1999 Aug 20;1420(1):153-67.
10. Vingerhoeds MH, Steerenberg PA, Hendriks JJ, Dekker LC, Van Hoesel QG, Crommelin DJ, Storm G. Immunoliposome-mediated targeting of doxorubicin to human ovarian carcinoma in vitro and in vivo. British journal of cancer. 1996 Oct 1;74(7):1023-9.
11. Kirpotin D, Park JW, Hong K, Zalipsky S, Li WL, Carter P, Benz CC, Papahadjopoulos D. Sterically stabilized anti-HER2 immunoliposomes: design and targeting to human breast cancer cells in vitro. Biochemistry. 1997 Jan 7;36(1):66-75.
12. Garnier B, Bouter A, Gounou C, Petry KG, Brisson AR. Annexin A5-functionalized liposomes for targeting phosphatidylserine-exposing membranes. Bioconjugate chemistry. 2009 Oct 19;20(11):2114-22.
13. Mattson G, Conklin E, Desai S, Nielander G, Savage MD, Morgensen S. A practical approach to crosslinking. Molecular biology reports. 1993 Apr 1;17(3):167-83.
14. Smyth DG, Blumenfeld OO, Konigsberg W. Reactions of N-ethylmaleimide with peptides and amino acids. Biochemical Journal. 1964 Jun;91(3):589-95.
15. Harokopakis E, Childers NK, Michalek SM, Zhang SS, Tomasi M. Conjugation of cholera toxin or its B subunit to liposomes for targeted delivery of antigens. Journal of immunological methods. 1995 Sep 11;185(1):31-42.
16. Gradauer K, Vonach C, Leitinger G, Kolb D, Fröhlich E, Roblegg E, Bernkop-Schnürch A, Prassl R. Chemical coupling of thiolated chitosan to preformed liposomes improves mucoadhesive properties. International journal of nanomedicine. 2012;7:2523-34.
17. Gradauer K, Barthelmes J, Vonach C, Almer G, Mangge H, Teubl B, Roblegg E, Dünnhaupt S, Fröhlich E, Bernkop-Schnürch A, Prassl R. Liposomes coated with thiolated chitosan enhance oral peptide delivery to rats. Journal of controlled release. 2013 Dec 28;172(3):872-8.
18. Moreira JN, Ishida T, Gaspar R, Allen TM. Use of the post-insertion technique to insert peptide ligands into pre-formed stealth liposomes with retention of binding activity and cytotoxicity. Pharmaceutical research. 2002 Mar 1;19(3):265-9.
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
大家都是用什么方法挑选细胞单克隆的
单克隆:单克隆是指‘子代来源于一个母体.
细胞培养:细胞的大规模克隆.细胞培养,既包括微生物细胞的培养,细胞培养技术可以由一个细胞经过大量培养成为简单的单细胞或极少分化的多细胞.
单克隆一般常指动植物细胞的克隆,细胞培养一般是指动物、微生物等细胞的细胞克隆.
二者没有什么明显区别.单克隆在单克隆抗体制备中比较常见.其实是对骨髓瘤细胞的细胞培养.
目标蛋白对细胞有毒性,导致细胞死亡;
转染试剂以及DNA用量信息需要优化,否则对细胞具有伤害;
细胞贴壁转染之后没有正常换液。
建议:考虑对目标蛋白进行截短构建、尝试其他细胞系统;摸索转染试剂以及DNA用量信息,如果转染试剂毒性太大,可以考虑尝试义翘转染试剂sinofection;对转染后的细胞进行换液处理,如果细胞状态感觉不够理想,可以考虑添加一些血清来帮助细胞恢复健康。
以上所有分析、建议的前提是,细胞培养、无菌操作等等都没有问题。祝顺利,加油~
我转的是7901、7901/DDP两种细胞,前者7901细胞很容易就转上,并且转后,状态良好,可是7901/DDP一转就死,我用的是吉玛慢病毒,转24小时后换液,刚开始一两天,没有异常,但后来细胞慢慢就死了,并且不是漂浮的,很多是贴着壁死,像是瓦解了一样
这是未转时细胞的样子
这是细胞转后,死亡的样子
并且即使是有些细胞未死,细胞后来也变得很脏,感觉有很破碎的细胞碎片
本人实验小白,**园子里大神指点,急,实在不知道怎么回事
“转化”是指含外源基因的重组质粒(载体)将外源基因直接导入原核细胞(如细菌);
“转导”指通过重组病毒载体将外源基因导入真核细胞或原核细胞;
“转染”指重组质粒载体或游离核苷酸在脂质体等介导下进入真核细胞;
“感染”在基因转移实验中强调重组病毒载体入侵受体细胞的过程。
在使用这4 个名词时, 应仔细分析基因转移实验的四要素——转移物、载体、介导方法、受体细胞类型,而正确区 分载体和受体细胞类型是辨析的关键点。当载体是重组质粒时,如受体细胞是原核细胞应使 用“转化”,如受体细胞是真核细胞则使用“转染”;当载体是重组病毒时,如强调转移物进 入受体细胞应使用“转导”,如强调重组病毒载体进入受体细胞的过程则使用“感染”。
各位版友求助,
我使用Hek293构建转染模型,瞬转5质粒,用lipo2000做转染体系。
转染48h,发现荧光较强的细胞都在爬片的边缘,比例十分少。是因为我添加试剂的手法不对吗。
同时也发现加入转染体系后细胞状态特别差。想问一下用lipo2000时可以用无双抗的10%FBSDMEM吗。我转染前6h现在用的是纯DMEM,不含FBS。
请各位大神帮忙
转染分2种,一种是瞬时转染,即转染后让细胞表达目的蛋白后即提取蛋白,提一次蛋白,转染一次,这种方式一般不传代;
另一种转染为稳定转染,转染后加入一定选择压力进行筛选,没有转染的细胞不能存活,只留下转染的细胞,这种情况下可以筛选单个转染细胞,构建稳定表达某一特定蛋白或基因的细胞系。
其次要看下你选择单位的规模如何,做的比较好的,还是上海这边的,你可以看下基尔顿生物,原代细胞培养,动物造模,整体课题外包。
暂无品牌问答