BioHomogenizerThe BioHomogenizer is a rotor-stator type tissue homogenizer designed to rapidly homogenize, disperse, and emulsify biological samples in aqueous media from 1 to 1000 ml. The BioHomogenizer includes both the motor and probe.Cat. No. 1281, BioHomogenizer for 5-200ml samples, complete with 1.4 cm probeCat. No. 1281EUR, 230 volt version of No. 1281Cat. No. 1285, BioHomogenizer for 100-2000ml samples, complete with 2.5 cm probeCat. No. 1285EUR, 230 volt version of No. 1285Our Price : $0.00 Catalog Number Please choose catalog number 1281EUR 1285 1285EUR 1281 QTY: Add to Cart Description Features Specifications Other Information The powerful 10,000 rpm motor is totally sealed and can be hand-held or stand mounted. During operation, the suspended material is repeatedly cycled through 12 narrow slits in the stator by the action of a high speed rotor. The material is rapidly sheared and disintegrated by the high frequency mechanical action. Complete homogenization of soft tissue (muscle, liver, brain, etc.) is usually achieved in one minute or less. Samples may be processed in a test tube chilled during treatment by immersion in an ice bath. Other applications include dispersion and emulsification of dairy and cosmetic products.The BioHomogenizer comes complete.  The price includes both motor and a probe of your choice. Color Blue Universal Motor: AC/DC 110V. Two Speeds: 7,000 and 10,000 rpm. Loading: 100 watts (designed for intermittent operation of less than 5 minutes per run). Insulation: Double insulated, sealed motor. Cable: Two-conductor. Overall Length: 33 cm Probe Length: 14.5 cm Stator Diameter: 1.4 cm or 2.5 cm (2 models available) Weight: 1 lb. 10 oz. Versatile: Stainless-steel rotor-stator achieves any combination of mixing, emulsification, shredding, or chopping. Practical: The sample is usually contained in a test tube or beaker and can be kept cold by immersion in ice Handy and mobile. Easy to hold and feather-light Simple to use. No sample loss due to transfers from a blender vessel. Just hold it in a vessel and turn on the two-speed switch. Easy to clean. Rinse it under a tap or in a washing up container. Quality designed. Powerful two speed 7,000/10,000 rpm motor. Totally sealed and double insulated for safety. Simple operation. Two-postition momentary switch.OPERATING INSTRUCTIONS.  BioHomogenizer operating instructions are essentially the same as for the Tissue-Tearor.  See http://www.biospec.com/instructions/tissue_tearor/.You May Also Be Interested In...Tissue-TearorThe Tissue-Tearor is a rotor/stator type tissue homogenizer which can rapidly homogenize, disrupt, and emulsify plant and animal samples in 0.5 - 1000 ml of liquid. Complete homogenization of tissues (muscle, liver, breast tissue, etc.) is usually achieved in ten to thirty seconds. Little, if any, heat is produced during the process. Rotor/stator homogenizers cannot efficiently disrupt microorganisms. This "limitation" can be an advantage if you want to homogenize or disperse tissue sample (or soil or waste samples) in order to recover viable bacteria or viruses for plating and analysis.If you need a 230 volt unit, please select models that end in EUR. When ordering select one of our four different probe sizes - 04, 07, XL, and 14. Unlike most competitive Brands of rotor-stator homogenizer, THE TISSUE-TEAROR COMES COMPLETE WITH BOTH THE HIGH-SPEED MOTOR AND ONE STAINLESS STEEL PROBE OF YOUR CHOICE. See chart below for probe selection guidance. Additional probes are available. All are interchangeable with the TT motor unit. A cord-less variety of the TissueTearor is also available with model numbers ending in CL.Read more >Price: $855.00BioHomogenizer Closed Container Consists of a ~500 ml (one pint), wide mouth glass jar and a polypropylene lid. The lid has a close tolerance hole in the center that accommodates the shaft of the BioHomogenizer. Installation of the accessory with the BioHomogenizer is a toolless, five-minute task.Read more >Price: