Clone | VIT200 |
Isotype | IgG2a |
Product Type | Primary Antibodies |
Units | 2ml (100 Tests) |
Host | Mouse |
Species reactivity | Human |
Application | Direct ImmunofluorescenceFlow CytometryImmunofluoresenceIndirect Immunofluorescence |
BackgroundThe CD45 molecule is typically expressed at high levels on all hematopoietic cells. CD45 is a major component of the glycocalix of these cells and can be expressed in different isoforms. Antibody VIT200 recognizes a pan CD45 epitope, which is expressed on all hematopoietic cells.The VIT200 antibody permits the identification and enumeration of human leukocytes using flow cytometry. Results must be put within the context of other diagnostic tests as well as the clinical history of the patient by a certified professional before final interpretation. Analyses performed with this antibody should be paralleled by positive and negative controls. If unexpected results are obtained which cannot be attributed to differences in laboratory procedures, please contact us.
Product2 ml of FITC-conjugatedanti CD45 (clone VIT200) in PBS pH 7.2, 1% BSA, and 0.05% NaN3, approximately 100 tests.
Product Form: FITC
Formulation: PBS pH 7.2, 1% BSA, 0.05% NaN3
SpecificityThe CD45 mAb (clone VIT200) recognizes a pan CD45 epitope. The sensitivity of VIT200 mAb is determined by staining well-definted blood samples from representative donors with serial-fold mAb dilutions to obtain a titration curve that allows relating the mAb concentration to the percentage of stained cells and geometric MFI (mean fluorescence intensity). For this purpose, a mAb-concentration range is selected to include both the saturation point (i.e. the mAb dilution expected to bind all epitopes on the target cell) and the detection threshold (i.e. the mAb dilution expected to represent the least amount of mAb needed to detect an identical percentage of cells). In practice, 50 µl of leukocytes containing 10^7 cells/ml are stained with 20 µl mAb of various dilutions to obtain a titration curve and to identify the saturation point and detection threshold. The final concentration of the product is then adjusted to be at least 3-fold above the detection threshold. In addition and to control lot-to-lot variation, the given lot is compared and adjusted to fluorescence standards with defined intensity.
ApplicationsDirect Immunofluorescence (Staining Procedure) Nordic-MUbio fluorochrome labeled antibodies are designed for use with either whole blood or isolated mononuclear cell (MNC) preparations. Proposed staining procedure for whole blood in short: - For each sample add 50 µl of EDTA anti-coagulated blood to a 3-5 ml tube - Add 20 µl of the appropriate Nordic-MUbio monoclonal antibody conjugate - Incubate the tube for 15 minutes at 4°C or at room temperature in the dark - Add 100 µl NM-LYSE (Cat.No. GAS-003) to each tube and incubate for 10 minutes at room temperature - Add 3-4 ml of destilled water and vortex, incubate for 5-10 minutes at room temperature - Centrifuge tube for 5 minutes at 300 g - Aspirate supernatant and resuspend pellet in 0.3 ml of sheath fluid - Analyze immediately or store samples at 2-8° C in the dark and analyze within 24 hoursFor “No-Wash” protocol please refer to www.nordicmubio.comProposed staining procedure for MNC in short: - Carefully add 20 µl antibody conjugate and 50-100 µl MNC to the bottom of a tube - Vortex at low speed for 1-2 seconds - Incubate for 15-30 minutes at 2-8°C or at room temperature - Centrifuge tubes for 5 minutes at 300 g - Remove supernatant, resuspend cells in 2-5 ml of phosphate buffered saline (PBS) and centrifuge cells again for 5 minutes at 300 g - Remove supernatant and resuspend cells in sheath fluid for immediate analysis or resuspend cells in 0.5 ml 1 % formaldehyde and store them at 2-8°C in the dark. Analyze fixed cells within 24 hoursIndirect Immunofluorescence (Staining Procedure) - Mix 20 µl Nordic-MUbio purified antibody with 50 µl whole blood or MNC suspension - Incubate for 15 minutes at 2-8°C - Wash cells with phosphate buffered saline (PBS) - Add to cell pellet 20 µl of affinity purified, fluorochrome labeled F(ab’)2 anti mouse Ig antibodies- Incubate for 15 minutes at 2-8°C - Wash cells with phosphate buffered saline (PBS) or proceed as described for direct staining
StorageNordic-MUbio monoclonal antibody reagents contain optimal concentrations of affinity-purified antibody. For stability reasons this monoclonal antibody solution contains sodium azide. These reagents should be stored at 2-8°C (DO NOT FREEZE!) and protected from prolonged exposure to light. If a slight precipitation occurs upon storage, this should be removed by centrifugation. It will not affect the performance or the concentration of the product. Stability of the reagent: Please refer to the expiry date printed onto the vial. The use of the reagent after the expiration date is not recommended.
CautionThis product is intended FOR RESEARCH USE ONLY, and FOR TESTS IN VITRO, not for use in diagnostic or therapeutic procedures involving humans or animals. It may contain hazardous ingredients. Please refer to the Safety Data Sheets (SDS) for additional information and proper handling procedures. Dispose product remainders according to local regulations.This datasheet is as accurate as reasonably achievable, but Exalpha Biologicals accepts no liability for any inaccuracies or omissions in this information.
References1. Battifora, H. & Trowbridge, I. S. (1983) Cancer 51, 816-21. 2. Brocklebank, A. M. & Sparrow, R. L. (2001) Cytometry 46, 254-61. 3. Cobbold, S., Hale, G. & Waldmann, H. (1987) In Leukocyte Typing III (Oxford University Press, Oxford-New York-Tokyo) p788-803.4. Dalchau, R., Kirkley, J. & Fabre, J. W. (1980) Eur J Immunol 10, 737-44. 5. Nicholson, J. K., Hubbard, M. & Jones, B. M. (1996) Cytometry 26, 16-21. 6. Omary, M. B., Trowbridge, I. S. & Battifora, H. A. (1980) J Exp Med 152, 842-527. Schraven, B., Roux, M., Hutmacher, B. & Meuer, S. C. (1989) Eur J Immunol 19, 397-403. 8. Sugita, K., Majdic, O., Stockinger, H., Holter, W., Burger, R. & Knapp, W. (1987) Transplantation 43, 570-4. 9. Sun, T., Sangaline, R., Ryder, J., Gibbens, K., Rollo, C., Stewart, S. & Rajagopalan, C. (1997) Am J Clin Pathol 108, 152-7. 10. Thomas, M. L. (1989) Annu Rev Immunol 7, 339-69.
WarrantyThe products sold hereunder are warranted only to conform to the quantity and contents stated on the label at the time of delivery to the customer. There are no warranties, expressed or implied, that extend beyond the description on the label of the product. Exalpha`s sole liability is limited to either replacement of the products or refund of the purchase price. Exalpha is not liable for property damage, personal injury, or economic loss caused by the product.
CE MarkCE
Safety Datasheet(s) for this product:EA_Sodium Azide/wp-content/uploads/SDS/Antibody SDS with Sodium AzideV2.pdf
ebiomall.com
>
>
>
>
>
>
>
>
>
>
>
>
1.标准曲线的标准品是否一定要梯度稀释,为什么?我试过非梯度稀释的,也可以达到线性R2=0.99.
2.我用了CurveExpert做标曲,自动搜索后发现有10种提供的方程,各种形式的,其中一个十分适合我的实验结果(LogisticModel),而其他的感觉又不适合,因为结果常常为负值。这又是为啥捏?
3.实验的酶标仪最大OD值可以测到4,如果我的测量结果在1.3,是否像其他人所说的>1了就不准确了。
4.利用夹心法进行定量分析是否一定要使用线性方程?
不好意思啊,一下问了这么多问题,最近做了一个月的ELISA,完全摸不清头脑啊。谢谢各位了
我现在用商品化的试剂盒进行夹心法ELISA测定某抗体的浓度,盒子给定了4个标准品,标准品抗体浓度为70000~1000单位,测定步骤中要求对样品进行1:1000稀释后测定。
但是有的样本按照1:1000稀释后,最终OD值大于70000浓度的标准品的OD值,然后使用ELISACALC软件进行四参数拟合,超过了标准曲线的范围,就算不出来这个样品的浓度,但是如果在1000-70000之间的OD值就可以算出相应浓度。请教大神们,接下来我是否可以对样品进行1:2000,1:4000浓度稀释,算出结果后再×2、×4,算作此样品的浓度呢?还是直接给一个>70000的定性结果?或者可以有能算出来的其他软件?
Ps试剂盒中提及Dilutionlinearity(稀释线性?)为141%,这个是什么意思呢?
多谢!!
1. 直接法测定抗原 2.间接法测定抗体 3.双抗体夹心法测定抗原4. 竞争法测定抗原 厚百生物专业提供各类生化实验试剂、仪器、耗材,提供技术服务,满足您的实验室常规采购需求。厚百,让您更省心!
请大家帮帮忙,第一步加完抗原后必须封闭吗
暂无品牌问答